Jailbreaks

Hello. The new version Redsn0w 0.9.6b6. The users of the new unlock iOS 4.2.1 lately there are more and more problems with their phones. The main problems are: overheating, brake, signal loss and died Push. Author unlocking, Sam Bingner, said that the problem is not unlock, and built-in haktivatsii redsn0w. He has released a new tool «Subscriber Artificial Module (SAM)», which aims to remove all these shoals. Now tell us what to do:1. Download the firmware iOS 4.2.1.Firmware iOS 4.2.1 for IPhone 3G - http://appldnld.apple.com/iPhone4/061-9 ...store.ipswFirmware iOS 4.2.1 for IPhone 3GS - http://appldnld.apple.com/iPhone4/061-9 ...store.ipswIf the firmware download with a resolution of ZIP, but not IPSW, then look here how to fix this - viewtopic.php? T = 143592. Downloading Redsn0w 0.9.6b6Redsn0w 0.6.9b6 for windows - http://letitbit.net/download/49524.42c3 ...6.zip.htmlRedsn0w 0.9.6b6 for mac - http://letitbit.net/download/47929.4b69 ... 6.zip.html3. Download the program from the official site F0recast - http://www.ih8sn0w.com.We need it in order to determine the version BootRom. Here's how to use it - viewtopic.php? F = 26 & t = 213274. Reflash your IPhone on iOS 4.2.1.5. Close ITunes.6. Start RedSn0w 0.9.6beta6. Click Browse and navigate to the file iOS 4.2.1.
7. Here to warn you that if your new IPhone 3GS BootRom, then the vac will be tied dzheil.
8. Click OK.9. You should receive an inscription that the firmware is identified.
10. Click Next.11. After a short training in the process of jailbreaking ...
window will appear select options. Here we must be sure to note items Install Cydia and Install iPad baseband. If desired, you can also change the boot image and the picture for Recovery Mode.
12. In the next window, a warning that the iPhone must be switched on and connected by cable to a computer. Make sure that this is indeed so, and click Next.
13. Next, enter the device into DFU Mode according to the instructions of the program. They consist of three points are highlighted at the right time.1. Click sleep (Power) for 3 seconds.2. Without releasing the button, sleep, click the Home »(Home) in 7 seconds.3. Without releasing the home, release the Sleep (Power) and continue to hold the home button (Home) for about 15 seconds.
14. Next to begin the process of jailbreaking.
15. Now the owners of the new IPhone 3GS BootRom, will need more time to drive them through the IPhone Redsn0w, only now it will be easier. In the window with a choice of options will need to select only the item Just boot tethered right now and your IPhone comes to life.
16. Now we should deaktvirovat your phone, then to activate it officially by Subscriber Artificial Module (SAM). To do this, check out the repository and Cydia repo.bingner.com SAM SAMPrefs, rerun Redsn0w 0.9.6b6 and selecting menu options, click the checkbox Deactivate.
17. Go to Settings iPhone, vyberite SAM, and click De-Activate iPhone.18. Open iTunes and activate the phone officially. If iTunes will complain about incorrect SIM-card, select the desired operator manual (in the settings instead of automatically select SIMID).19. Make unlock your phone using Ultrasn0w 1.2.20. Now, after turning off the device to get the most Cydia and system software installed in it, the owners of the new iPhone 3GS BootRom will need to repeat the process again tied jailbreak. Everything else should work after you reboot the iPhone and without it.

Jailbreak iOS 4 for Windows and Mac. Redsn0w 0.9.5b5-2

Redsn0w 0.9.5b5-2 for jailbreaking iOS 4 GM Windows and Mac


RedSn0w 0.9.5b5-2 - a utility that makes the jailbreak iOS 4 Gold Master (GM) on the iPhone 3G and iPod Touch 2G.
VERY important!
Members of unofficial iPhone 3G should not use the firmware iOS 4.If the owners of unofficial iPhone 3G will install the firmware iOS 4, then lose the opportunity to unlock your phone.In this case you will have to wait for upgrade utilities, releases a new modem (ultrasn0w or blacksn0w).
The new version RedSn0w 0.9.5b5-2, we saw:
1. The inclusion of multi-tasking.2. Ability to change the background on the springboard.3. Displays the battery charge percentage.4. Verbose mode boot.
These innovations will help to avoid lengthy procedures to install different mods via Cydia or modified files manually via SSH.
Download RedSn0w 0.9.5b5-2 for Windows
Download RedSn0w 0.9.5b5-2 for Mac
Once again I warn you that this is only available for jailbroken iPhone 3G and iPod touch 2G.
Haktivatsii before the official release iOS 4 will not, so users zalochennyh a telephone operator should not use Redsn0w.Until it should.


redsn0w 0.9.5b5-5 Jailbreak iOS 4.0 for iPhone 3G
Team ayfonovskih hackers Dev Team has released an update of its utility Redsn0w with version 0.9.5b5-5 (used to jailbreak iPhone 3G and iPod Touch).


The new version Redsn0w 0.9.5b5-5 fixes MMC and APN, which were observed after the previous version of the jailbreak Redsn0w 0.9.5b5-4
If you do jailbreak utility Redsn0w 0.9.5b5-5 and you have a problem with the APN or MMS, then use the new version of the utility Redsn0w 0.9.5b5-5.
Restored to a clean firmware iOS 4.0 is not needed - in redsn0w need to uncheck Cydia.
Well, if no such problems, then sleep soundly.
Download RedSn0w 0.9.5b5-5 for Windows
Download RedSn0w 0.9.5b5-5 for Mac


If you have a system to Windows, this is for you !!!!!
This walkthrough will allow you to jailbreak and unlock iPhone 3G for iOS 4.2.1 using the utility RedSn0w 0.9.6b5 on Windows. There will also be instructed to update the baseband, if it is necessary for unlocking (otvyazki from a cellular operator). If you do not need unlock, you can only jailbreak.
Step 1Create a folder called "Pwnage" on the desktop. Download it all you need:RedSn0w download here or here. Get into the same folder iPhone 3G iOS 4.2.1: iPhone1, 2_4.2.1_8C148_Restore.ipsw
Unzip the file redsn0w RedSn0w zip into the same directory.

Step 2Connect iPhone to your computer and download iTunes. Make a backup copy, since all the data from the iPhone will be deleted.
Choose your iPhone on the left. Click on the keyboard Shift key and click on Restore.
Navigate to the Pwnage folder and select the product downloaded firmware 4.2.1.Then press Choose.

Step 3Once iTunes has finished updating the firmware to the iPhone, open the Pwnage folder and run the application redsn0w.On Windows Vista or Windows 7 it should be done as follows: Right-click on redsn0w.exe and run from an administrator in compatibility mode for Windows XP (Windows XP compatibility mode).

Step 4After starting the RedSn0w press Browse.

Step 5Select Download Firmware 4.2.1 from the Pwnage folder and click Open.

Step 6Redsn0w check the firmware. Then click Next.

Step 7RedSn0w prepare for the jailbreak.

Step 8Now you can choose the option jailbreak.
Verbose boot - will display additional information is required for developers to debug.Make sure that you choose to install Cydia.You can choose your own pictures of logos to be displayed at startup - Custom boot logo and Custom recovery logo. Rules for the icons are simple: RGB or Grayscale with alpha channel and is smaller than 320x480.You can also choose Multitasking, Wallpapers and Battery Percentage. Note that this can degrade performance.If you need to update the baseband to version 06.15 iPad to unlock, select Install iPad Baseband. In this case, it will be shown a window with the message, read it and agree, click Yes.
Click the button Next.

Step 9Connect your iPhone to your computer and turn it off. Then click Next.

Step 10RedSn0w will issue recommendations for the transfer of iPhone mode DFU.
Press and hold the power button (on top of the flange) and click Home (bottom round) for 10 seconds.
Then release the power button while still holding the Home button for 10 seconds.

Step 11RedSn0w downloads if necessary iPad baseband from internet and the iPhone will restart.

Step 12Then RedSn0w will jailbreak, download RAM Disk and Kernel.


Step 13After jailbreaking process is complete, will be engraved message that RedSn0w finished (Done!). Click Finish. After downloading the iPhone (can take 5 minutes), you'll see icons Cydia.

Step 14Start Cydia and let it install the updates.
Step 15If you want unlock - set ultrasn0w in Cydia.Launch Cydia.Go to Manage, then click on Sources.Click the Edit button in the upper right corner.Then click the Add button in the upper left corner.Enter the address http://repo666.ultrasn0w.com and click Add Source.Then click Done and click on the new repository,Now you must select ultrasn0w and click the Install button top right.Restart the iPhone.For T-Mobile USA off 3G.You should see the network.Congratulations you have unlocked your iPhone!






IF YOU ARE USING MAC, this is for you!This manual will help you to jailbreak firmware 4.2.1 on your iDevayse with RedSn0w. Before specifically updated iOS 4.2.1 on your iPhone, make sure you have it official and is not locked by some operators as unlock is not yet available and you may permanently lose the opportunity to call.Redsn0w 0.9.6b4 at the latest Apple devices with firmware iOS 4.2.1delaet only tied jailbreak, which means that after every turn off this device you will need Redsn0w 0.9.6b4 to run it, how to do it is written below.
What jailbreak can be done on any device:
iPhone 4 - bound
iPad - tied
iPhone 3GS (with a new BootROM) - tied
iPod Touch 4 - bound
iPod Touch 3G - tied
iPod Touch 2G MC - tied
iPhone 3G - not attached
iPhone 3GS (old BootROM) - is not bound
iPod Touch 2G (not MC) is not bound

And so if you decide to still hack your device, then we will need:
- IOS 4.2.1 firmware for your device
- Redsn0w 0.9.6b4
- ITunes 10.1

Step 1Create a folder on your desktop called Pwnage. Put back the downloaded RedSn0w and correct firmware version 4.2.1 and then unzip Redsn0w 0.9.6b4 in the same folder.

Step 2Start Redsn0w 0.9.6b4 and click «Browse»


Step 3Select the 4.2.1 firmware you downloaded earlier and click «Open»

Step 4After the firmware to be checked, click «Next»

Step 5RedSn0w prepares information for jailbreak

Step 6Next, select Cydia and click «Next»

Step 7Connect your iPhone / iPad / iPod to PC and turn it off, and then click «Next»

Step 8Further, following the prompts in the pictures, type device in DFU-mode!


Step 9Once you do it right to begin the process of jailbreaking!

Step 10Do not do anything once you're done you will see a notification and you will need to click «Finish». All your iDevays hacked!

IMPORTANT:If your device is attachment then jailbreak in case of shutdown or fully discharged battery, to enable you to connect it to a PC running Redsn0w 0.9.6b4, only select the option «Just boot tethered» and press «Next»



If Cydia does not work you must turn off the iPhone and triggering his redsnou as shown in the last screen shot, after which the Cydia should work!
Questions and discussion in our forum!
 Limera1n RC1b (Jailbreak iOS 4.1 for all devices)Judging by the entries in Twitter, Geohot nevertheless decided to return. He stated that he had found a new exploit in BootROM, with which you can create a truly versatile tool for jailbreaking iOS 4.1. Geohot promises that using the utility Limera1n, now jailbroken and users will be able to make the iPhone 3GS and iPod Touch 3G, of which "forgot" creators GreenPois0n.



Return Geohota in their twitter confirmed members of the DevTeam and Chronic Dev-Team. However, as it turned out, this exploit was known to these commands, but they wanted him to reserve for the next firmware.
Utility is available on the official website - http://www.limera1n.com [or here]
Soup compatible with this type of software:
IPhone 3GIPhone 3GS (new and old BootRom)IPhone 4IPod Touch 2GIPod Touch 3GIPod Touch 4IPad
Instruction.
1. Download the utility limera1n - http://www.limera1n.com [mirror]2. Run it.3. Presses make it ra1n.




4. Hold the right are two buttons: Home and Power.


3. Release the button Power.


4. Release the button Home.






Even if the phone is hung lace, you still follow the instructions above.+ Who cares, there's - the original instructions from Geohota
Operating systems that are compatible with this utility:1. Winows xp (you may have problems)2. Windows vista (you may have problems)3. Windows 7 32 bit (problem should arise)
A hacker by the nickname in his p0sixninja tviterre stated the following:We have three options, A) Not release greenpois0n, B) Burn a second bootrom expoit, or C) Break our ETA and implement geo's exploit
which means:1. Perhaps that issue Dzheyla codenamed "Green poison" will not.2. They do not want to disclose the second hole in BootRom.3. Remodel "green poison" for which a hole is made Limera1n.
All four iphone with firmware lower than 4.1 can also be updated to make Jail and unlock using: Raising the firmware for the iphone 4 to 4.1 without an increase in modem
update: works for iPhone 3Gs with new and old Booth. CHECKED masikupdate: although modmyi.com declares that this Limera1n makes a jailbreak on all devices including the new iphone 3Gs with Bout. To all this it is worth noting that the whole community of hackers working on iOS strongly indignant postupokm Geohota.
After limera1n will complete jailbreak, install sidiyu. This requires a Wi-Fi, connecting to the Internet and click on the white square, which appeared after Dzheyla in the program select the label sidii, click install and wait until the installation sidii, which will provide an opportunity to unlock those to whom it is so necessary. (Alexeylg)
for that to file managers have seen the file system from the iPhone to put patches sidii afc2add (this patch is available in erpozitorii apt.alleon.name only entitled Blackra1n root fix)
P.S. If you can not make a jailbreak by limera1n, then use the program's greenpois0n - viewtopic.php? F = 4 & t = 23379

 blackra1n RC3 - ​​jailbreak and unlock firmware 3.1.2 for iPhone
blackra1n RC3 - ​​is a free tool to jailbreak and unlock firmware 3.1.2.It is a universal program that works under Windows and be able to do jailbreak on all iPhone and iPod Touch:iPhone GSM (2G)iPhone 3GiPhone 3GSiPod Touch Generation 1iPod Touch 2 nd generationiPod Touch 3rd generation
The whole process of jailbreaking with blackra1n takes only 30 seconds.

Owners zalochenyh iPhone 3G and iPhone 3GS utility can now be used!


ATTENTION ALL OWNERS OF IPHONE 3Gs: now you do notbe able to flash your phone to 3.1.2 - 3.1.3 only !!!!!
download the firmware and hold shift key on your keyboard and select the restore point out such downloadfirmware!firmware 3.1.2 for iphone 2Gfile iPhone1, 1_3.1.2_7D11_Restore.ipsw
firmware 3.1.2 for iphone 3Gfile iPhone1, 2_3.1.2_7D11_Restore.ipsw
firmware 3.1.2 for iphone 3Gsfile iPhone2, 1_3.1.2_7D11_Restore.ipsw
Blackra1n program for Windows can be downloaded from blackra1n.com or here.
How to use the utility blackra1n
The tool is designed to jailbreak all iPhone 3GS, 3G, 2G, and iPod touch 1, 2 and 3rdgenerations.
Attention all owners neofitsalnyh iPhone 3G and iPhone 3Gs!
Only blackra1n under RC3 builds does unlock firmware 3.1.2!
This instruction is for all owners of iPhones and iPods.
Make sure that your iPhone or iPod connected to your computer!
before the procedure jailbreak make sure that:
1. Installed on your iPhone firmware 3.1.2
2. On your computer running the latest version of iTunes 9.0.1.8
3. Do you have access to Wi-Fi network (it is necessary to install Cydia on iPhone).
4. Most recently was listed for a feature that if you start to make the procedurejailbreak when the iTunes, the whole process can hang stupid, so
 ALWAYS turn off iTunes!
If everything is there, then proceed.
1. Downloading from the site blackra1n blackra1n.com or from our website.


To do this, click on the icon in Windows and save blackra1n.exe on your computer.


And run blackra1n.exe


2. Convinced that the iPhone is connected to the computer and press the button make it ra1n


3. Phone goes into Recovery Mode (Recovery Mode)


On the desktop, iPhone will be a picture - photo Geohota.


After that, the process of jailbreaking iPhone.


Do not rush to touch the phone after the jailbreak zaversheinya need to restart the programitself restart your iPhone.


A message with a single OK button (always a good thing when UC) and to request financialthank Geohota (this is at your discretion).
Also, the report says that after a reboot iPhone it can be considered jailbroken.


4. After rebooting the phone on his desk will be the program icon blackra1n.


5. Select the Installer, which you prefer: Cydia or Rock. We recommendselect Cydia! (Icy lost for the reason that RipDev no more!)


Then click the Install button in the upper right corner.
blackra1n starts downloading from the Internet and install the selected installer.




6. After installing blackra1n make respring and desktop iPhone icon will appear in the installerCydia or Roc.


Unlock:
7. Here, happily shouting and jubilant owners zalochennyh iPhone 3G and 3GS! : Wink:
There are two options for unlocking iPhone 3G and 3Gs:
1) If there is a WI-FI.After the phone will go back to respring blackra1n and now click on the tab sn0w,"Snow" will take its toll and you get a fully working phone! Congratulations!


blackra1n has done its job and now you can remove it from the iPhone.
To do this, go to the iPhone in the program blackra1n and then uninstall blackra1n.
2) If there is no WI-FI, a way of Dualcore.
If you do not have the opportunity to make unlock for the first method, then:
1. You need to restore the phone to custom firmware, which is already there Jail and Cydiaor make a Jail by Redsnow. (Custom firmware 3.1.2 for iPhone 3GS, iPhone 3Gand iPhone 2G from Santa-Claus_16 and [FAQ] RedSn0w 0.9 Jailbreak iPhone (all models) and iPod Touch(All models) for Windows and Mac OS)2. Downloading blacksn0w.deb3. Put at / var / root / media / Cydia / AutoInstall4. Reboot the phone 2 times.
But this method does not always and not all helps! We are waiting for solutions from Geohota or DevTeam!
PS: After all the action is sure to set afc2add of Sidii, it will work finefile manager.
ZY2: We strongly recommend! After all done, go to Sidiyu and pressbutton "make my life easier", to keep files on servers SHSH Saurika. By doing thistoday, you will be able to jailbreak tomorrow! If the Sidii hangs an inscription "this devicehas a 3.1 ECID SHSH on file ", then all is well can safely enjoy the new firmware!
 Only for iPhone 3GS!!!
Unlock iphone 2G if no network
Open Cydia and update it. Now locate the "BootNeuter" and install this application.


Clicking on the "Flash"-button and wait.
Warning: do not interrupt the process: It may take some time. Check chargedDoes your phone
PS [Cydia] afc2add-for file managers that would be seen after blackra1n
If, after Blackra1n no Wi-Fi, YouTube, Push
Activation Push Notifications and treatment of problems with YouTube

All owners of iPhones with the versions of the modem04.26.0805.11.0705.12.0105.13.04can make unlock (unlock).


Including the owners of the iPhone with firmware 3.1.3
To do this:
1. Jailbreak firmware 3.1.3 using redsn0w


2. Unlock your phone using the utility ultrasn0w.